Aquablast "Stripper" Gun Aquablast's Ultra High Pressure Stripper Guns
get right down to the metal!
A rugged pneumatic drive dual-trigger rotary surface preparation tool suitable for all
2750 - 4000 bar (40,000 - 60,000 psi) water blasting applications, Stripper Gun II can
be fitted to any present "tumble box" gun configuration.
Also available with hydraulic drive, Stripper Guns are designed and built by Aquablast
together with a wide range of nozzle options.
Stripper Gun II Upgraded Features |
| |
| |
• |
Pneumatic drive can be replaced by other manufacturers' air motors |
| |
| |
• |
Nozzle rotation by new lightweight belt drive unit |
| |
| |
• |
Total Weight only 4.8 Kgs (10.5 lbs) |
| |
| |
• |
New low friction long life bearing and seal |
| |
| |
• |
Hose swivel design allows rotation of hose under full pressure |
| |
| |
• |
New ergonomic layout allows fatigue-free blasting and easy access
to serviceable components |
| |
| |
• |
Compatible with all present "tumble box" remote pressure relief
switches normally associated with triplex pumps. |
| |
Standard Features |
| |
| |
• |
Pneumatic drive (lubrication free or hydraulic drive options) |
| |
| |
• |
Compressed air supply from either on-board compressor or external source;
air requirement per gun (8.5 litres/sec; 18 cfm); maximum operating distance 300 metres; rotation speed
up to 3000 rpm |
| |
| |
• |
Overall length standard gun: 910 mm inc. nozzle; minimum length available 330 mm |
| |
| |
• |
Max. flow rate:25 litres (5.5 IGPM) per minute |
| |
| |
• |
Max. operating pressure:4000 bar (58,000 psi) |
| |
| |
• |
Dual trigger layout |
| |
| |
• |
Standard gun compatible with single or multiple gun operation
from one pump |
| |
| |
• |
All rotary and seal components easily accessible |
| |
| |
• |
Low cost spares - no modular replacements |
| |
| |
• |
Wide range of nozzle options available; including lightweight titanium. |
| |
|
 |
|
